Product Overview
Microwave Remote System consists of two parts, the Master Unit and the Remote Unit, It uses a microwave link to relay the cellular network signal from original area covered by donor base station to a targeted area.
Unlike the Optic Repeater using an optic fiber to extend the cellular radio signal from Master Unit to Remote Unit, Microwave Remote Repeater uses a microwave link instead to extend the cellular radio signal from Master Unit location to its Remote Unit location, and provide cellular network coverage over there.
Microwave Remote Repeater typical application scenarios are:
- Remote project camps in the wilderness
- Rural areas with less network traffic needed
- Remote offshore production platform on the sea
- Remote industry park with less network traffic needed
- Short to medium term temporary facilities
Technical Specifications for Master Unit:
Master Unit of Microwave Remote Repeater
| Specification Items | Value |
| Mode Name | YMRGDW-MU33 |
| Supported Cellular Network Mode | GSM 2G /WCDMA 3G/ FDD LTE 4G / TDD LTE 4G |
| Supported Cellular Network Bands | B1(2100MHz) B3(1800MHz) B8(900MHz) |
| Number of Sub-bands Supported | 3 sub-bands for each of the supported working bands |
| Sub-band Bandwidth | 0.2M to 35MHz adjustable |
| Microwave Link working Frequency | 5.15-5.85GHZ/5.925-7.125GHz According to local regulation and supported cellular bands, Microwave link working frequency and its’ bandwidth are adjustable; |
| Maximum Gain | 95 ±3dB |
| RF Output Power | UL:23±2dBm; DL:33±2dBm |
| Pass Band Ripple | <±3dB |
| Gain Adjustment | ≥30dB |
| Auto Level Control | ≥30dB |
| Noise Figure | ≤ 8dB @ max gain |
| Input/Output VSWR | ≤ 1.6 |
| ACPR | ≤ -40dBc |
| EVM | ≤ 5% |
| Clock Synchronization Signal | GPS |
| Spurious Emissions | Comply with 3GPP TS36 |
| Group Delay | ＜5μs |
| RF Connector | N Female or 4.3-10 Female |
| Power Consumption | < 80W |
| Power Supply | AC 100-240V or DC28V |
| Local Control | Wi-Fi with browser, RJ45 with App |
| OMC(Optional) | LTE Modem |
| Approx. Weigh | 15Kg |
| Operating Temperature | -10℃ to 55℃ |
| Intrusion Protection | Outdoor IP65 |
| Humidity | 5% to 95% |
| MTBF | >50,000 hours |
| Installation Wise | Pole or wall mounted |
| Dimension (without connector) | 385*307*204mm |
Technical Specifications for Remote Unit:
Remote Unit of Microwave Remote Repeater
| Specification Items | Value |
| Mode Name | YMRGDW-RU43 |
| Supported Cellular Network Mode | GSM 2G /WCDMA 3G/ FDD LTE 4G / TDD LTE 4G |
| Supported Cellular Network Bands | B1(2100MHz) B3(1800MHz) B8(900MHz) |
| Number of Sub-bands Supported | 3 sub-bands for each of the supported working bands |
| Sub-band Bandwidth | 0.2M to 35MHz adjustable |
| Microwave Link working Frequency | 5.15-5.85GHZ/5.925-7.125GHz According to local regulation and supported cellular bands, Microwave link working frequency and its’ bandwidth are adjustable; |
| Maximum Gain | 100 ±3dB |
| RF Output Power | UL:43±2dBm; DL:43±2dBm |
| Pass Band Ripple | <±3dB |
| Gain Adjustment | ≥30dB |
| Auto Level Control | ≥30dB |
| Noise Figure | ≤ 8dB @ max gain |
| Input/Output VSWR | ≤ 1.6 |
| ACPR | ≤ -36dBc |
| EVM | ≤ 5% |
| Clock Synchronization Signal | GPS |
| Spurious Emissions | Comply with 3GPP TS36 |
| Group Delay | ＜5μs |
| RF Connector | N Female or 4.3-10 Female |
| Power Consumption | < 300W |
| Power Supply | AC 100-240V or DC28V |
| Local Control | Wi-Fi with browser, RJ45 with App |
| OMC(Optional) | LTE Modem |
| Approx. Weigh | 25Kg |
| Operating Temperature | -10℃ to 55℃ |
| Intrusion Protection | Outdoor IP65 |
| Humidity | 5% to 95% |
| MTBF | >50,000 hours |
| Installation Wise | Pole or wall mounted |
| Dimension (without connector) | 513*440*233mm |