1. Wi-Fi CPE Network Location
As shown below, in the WLAN Network Solution Wi-Fi CPE devices are generally form an access transmission links with Wi-Fi Base Stations.
2. Outstanding Performance
Wi-Fi Point-to-Multipoint (PTMP) bridge consists of two parts, the Wi-Fi Base Station and the Wi-Fi Client Perspective Equipment (the Wi-Fi CPE).
PTMP AC Series Wi-Fi CPE delivers 600+ Mbps throughput via its unique and powerful RF design that supports up to 256QAM modulation and 31 dBm output power. 720MHz dedicated CPU ensures swift data processing and high packet per second rate (PPS) which is important for real time data transmission applications. Gigabit Ethernet port with 802.3af/at standard supported allows powering the devices with PoE switches. Weatherproof IP-67 standard rated enclosure design allows using the equipment in any climate conditions.
3. Software Features
The full featured operating system makes this PTMP AC Series devices ideal not only for WISPs and operators, but also for security, enterprise or industrial applications. Proprietary data transmission protocol ensures smooth performance even in noisy areas at the same time delivering high capacity, low latency and high packet per second rate. QoS (quality of service) mechanism allows prioritizing mission critical data and efficiently transmitting voice, video or other real time data over the wireless network.
4. Powerful Software Tools
The PTMP AC series’ operating system ensures easy and rapid deployment of point-to-multipoint links with stable, fast performance. An intuitive and responsive user interface adjusts the layout based on the size of your screen. Essential tools including Setup Wizard, link test, antenna alignment, spectrum analyzer, and site survey are included to make set-up and troubleshooting more efficient. Automatic mechanisms such as auto-channel and automatic transmit power control optimize the link for maximum performance even in areas with high interference.
5. Easy Pre-Configuration
When configuring the devices, end-user device (e.g. your working PC) can connect to the master device by its ETH port through an UTP cable. To configure the slave devices automatically connect them as shown on the pictures below and wait until they appear in the List on the mater devices. The Master and Slaver devices can be connected with each other using wired or wireless connectivity when doing the configurations. PTMP AC Series devices can be discovered automatically by bonjour and SSDP protocols as well.
6. Technical Specifications
PTMP Wi-Fi CPE WiAU523 (With Integrated Antenna)
| Specification Items | Value |
| Radio Mode | MIMO 2X2 |
| Frequency Range | 4.900-6.100GHz, (FCC: 4.940 – 4.990 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz) |
| Channel Size | 5,10,20,40,80MHz |
| Modulation schemes | OFDM (256-QAM,64-QAM,16-QAM, QPSK, BPSK) |
| Data rates @ 80 MHz | 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps |
| Duplexing Scheme | TDD |
| Error Correction | BCC, LDPC |
| Radio security | Hardware AES-128 |
| Antenna Parameters | Integrated directional dual-pol 23 dBi panel |
| Wired Interface | 10/100/1000 Base-T with PoE IN (RJ45); |
| Physical Dimension | Length 379 mm (14.9”), width 387 mm (15.2”), height 51 mm (2”) |
| Mount length till pole | 124 mm (4.8‘’) |
| Weight including mount | 3.3kg |
| Power Supply | PoE 802.3at, isolated 42 – 57 VDC |
| Power Consumption | 8.6W |
| Power output method, voltage | PoE 802.3af, 48 VDC, 12.95W maximum |
| Power Kit | PoE inserter and AC/DC adapter are included |
| Operating temperature | -40℃ to 65℃ |
| Humidity | 0 ~ 90% (non-condensing) |
| System Monitoring | SNMP (V1), GUI/HTTP(S), Shell/SSH |
| System Configuration | GUI/HTTP(S) |
Data Rate
| Data Rate/Mbps | 866 | 780 | 650 | 585 | 520 | 390 | 260 | 195 | 130 | 65 |
| TX Power, dBm | 25 | 26 | 26 | 27 | 27 | 28 | 29 | 30 | 30 | 31 |
| Receive Sensitivity, dBm | -71 | -73 | -77 | -79 | -80 | -84 | -87 | -92 | -94 | -97 |
7. Software Features
- Wizard for fast link setup
- Centralized control from master: A) Common wireless link parameters; B) Individual slave parameters
- Smart Auto-channel
- Robust data security
- QoS with hardware acceleration
- Spectrum analyzer
- Wireless signal and device state indication on RGBLEDs
- Dual firmware image
8. POE Module 802.3af/at Insert Specifications
| Specification Items | Value |
| DC input voltage range | 44.0–57.0V |
| IEEE 802.3af/at compliant | POE output |
| Output power | Up to 28W |
| Power Output | RJ45 pins 1,2,4,5 (+) and 3,6,7,8 (-) |
| Data rate | 10/100/1000Mbps |
| Surge protection | 2kV line to line, 6kV line to ground (output port) |
| DC input connector | 1*connector |
| Data input jack | RJ45 |
| Data + Power output jack | RJ45 |
| Dimension | 117x87x34mm |
| Weight | 270g |
| Operating temperature | -40 to +65 ℃ |
| UTP/FTP cable length | 100m total (from switch to the device) |
9. Integrated Antenna Specifications
| Specification Items | Value |
| Frequency Range | 4.9 – 5.9 GHz |
| Gain | 23 dBi |
| Polarization | Dual Linear |
| Cross-pol Isolation | 27 dB |
| VSWR | <1.5 |
| Azimuth beamwidth (H pol) | 6 deg |
| Azimuth beamwidth (V pol) | 7 deg |
| Elevation beamwidth | 9 deg |